config FB_MSM_MDSS_WRITEBACK
	bool "MDSS Writeback Panel"
	---help---
	The MDSS Writeback Panel provides support for routing the output of
	MDSS frame buffer driver and MDP processing to memory.

config FB_MSM_MDSS_HDMI_PANEL
	depends on FB_MSM_MDSS
	bool "MDSS HDMI Tx Panel"
	default n
	---help---
	The MDSS HDMI Panel provides support for transmitting TMDS signals of
	MDSS frame buffer data to connected hdmi compliant TVs, monitors etc.

config FB_MSM_MDSS_HDMI_MHL_SII8334
	depends on FB_MSM_MDSS_HDMI_PANEL
	bool 'MHL SII8334 support '
	default n
	---help---
	  Support the HDMI to MHL conversion.
	  MHL (Mobile High-Definition Link) technology
	  uses USB connector to output HDMI content

config FB_MSM_MDSS_SPI_PANEL
	depends on FB_MSM_MDSS
	bool "Support SPI panel feature"
	default n
	---help---
	The MDSS SPI Panel provides support for transmittimg SPI signals of
	MDSS frame buffer data to connected panel. Limited by SPI rate, the
	current max fps only reach to 27 fps, and limited by MDP hardware
	architecture only supply on MDP3

config FB_MSM_MDSS_MHL3
	depends on FB_MSM_MDSS_HDMI_PANEL
	bool "MHL3 SII8620 Support"
	default n
	---help---
	  Support the SiliconImage 8620 MHL Tx transmitter that uses
	  USB connector to output HDMI content. Transmitter is an
	  i2c device acting as an HDMI to MHL bridge. Chip supports
	  MHL 3.0 standard.

config FB_MSM_MDSS_DSI_CTRL_STATUS
	tristate "DSI controller status check feature"
	---help---
	  Check DSI controller status periodically (default period is 5
	  seconds) by sending Bus-Turn-Around (BTA) command. If DSI controller
	  fails to acknowledge the BTA command, it sends PANEL_ALIVE=0 status
	  to HAL layer to reset the controller.

config FB_MSM_MDSS_EDP_PANEL
	depends on FB_MSM_MDSS
	bool "MDSS eDP Panel"
	---help---
	The MDSS eDP Panel provides support for eDP host controller driver
	which runs in Video mode only and is responsible for transmitting
	frame buffer from host SOC to eDP display panel.

config FB_MSM_MDSS_MDP3
	depends on FB_MSM_MDSS
	bool "MDP3 display controller"
	---help---
	The MDP3 provides support for an older version display controller
	included in latest display sub-system, known as MDSS.

config FB_MSM_MDSS_XLOG_DEBUG
	depends on FB_MSM_MDSS
	bool "Enable MDSS debugging"
	---help---
	The MDSS debugging provides support to enable display debugging
	features to: Dump MDSS registers during driver errors, panic
	driver during fatal errors and enable some display-driver logging
	into an internal buffer (this avoids logging overhead).

config FB_MSM_MDSS_FRC_DEBUG
	depends on DEBUG_FS && FB_MSM_MDSS
	bool "Enable Video FRC debugging"
	default n
	---help---
	The MDSS FRC debugging provides support to enable the deterministic
	frame rate control (FRC) debugging features to: Collect video frame
	statistics and check whether its output pattern matches expected
	cadence.

source "drivers/video/msm/mdss/samsung/Kconfig"

