Qualcomm GPU

Qualcomm Adreno GPU

Required properties:
- label:		A string used as a descriptive name for the device.
- compatible:		Must be "qcom,kgsl-3d0" and "qcom,kgsl-3d"
- reg:			Specifies the register base address and size. The second interval
			specifies the shader memory base address and size.
- reg-names:		Resource names used for the physical address of device registers
			and shader memory. "kgsl_3d0_reg_memory" gives the physical address
			and length of device registers while "kgsl_3d0_shader_memory" gives
			physical address and length of device shader memory.  If
			specified, "qfprom_memory" gives the range for the efuse
			registers used for various configuration options.
- interrupts:		Interrupt mapping for GPU IRQ.
- interrupt-names:	String property to describe the name of the interrupt.
- qcom,id:		An integer used as an identification number for the device.
- qcom,gpu-bimc-interface-clk-freq:
			GPU-BIMC interface clock needs to be set to this value for
			targets where B/W requirements does not meet GPU Turbo use cases.
- clocks:		List of phandle and clock specifier pairs, one pair
			for each clock input to the device.
- clock-names:		List of clock input name strings sorted in the same
			order as the clocks property.
				Current values of clock-names are:
				"src_clk", "core_clk", "iface_clk", "mem_clk", "mem_iface_clk",
				"alt_mem_iface_clk", "rbbmtimer_clk",  "alwayson_clk"
				"core_clk" and "iface_clk" are required and others are optional

- qcom,base-leakage-coefficient: Dynamic leakage coefficient.
- qcom,lm-limit:	Current limit for GPU limit management.

Bus Scaling Data:
- qcom,msm-bus,name: String property to describe the name of the 3D graphics processor.
- qcom,msm-bus,num-cases: This is the the number of Bus Scaling use cases defined in the vectors property.
- qcom,msm-bus,active-only: A boolean flag indicating if it is active only.
- qcom,msm-bus,num-paths: This represents the number of paths in each Bus Scaling Usecase.
- qcom,msm-bus,vectors-KBps: A series of 4 cell properties, format of which is:
						<src dst ab ib>, <src dst ab ib>, // For Bus Scaling Usecase 1
						<src dst ab ib>, <src dst ab ib>, // For Bus Scaling Usecase 2
						<..  ..  .. ..>, <..  ..  .. ..>; // For Bus Scaling Usecase n
						This property is a series of all vectors for all Bus Scaling Usecases.
						Each set of vectors for each usecase describes bandwidth votes for a combination
						of src/dst ports.  The driver will set the desired use case based on the selected
						power level and the desired bandwidth vote will be registered for the port pairs.
					Current values of src are:
						0 = MSM_BUS_MASTER_GRAPHICS_3D
						1 = MSM_BUS_MASTER_GRAPHICS_3D_PORT1
						2 = MSM_BUS_MASTER_V_OCMEM_GFX3D
					Current values of dst are:
						0 = MSM_BUS_SLAVE_EBI_CH0
						1 = MSM_BUS_SLAVE_OCMEM
					ab: Represents aggregated bandwidth. This value is 0 for Graphics.
					ib: Represents instantaneous bandwidth. This value has a range <0 8000 MB/s>

- qcom,ocmem-bus-client: Container for another set of bus scaling properties
						qcom,msm-bus,name
						qcom,msm-bus,num-cases
						qcom,msm-bus,num-paths
						qcom,msm-bus,vectors-KBps
			to be used by ocmem msm bus scaling client.

GDSC Oxili Regulators:
- regulator-names:		List of regulator name strings sorted in power-on order
- vddcx-supply:			Phandle for vddcx regulator device node.
- vdd-supply:			Phandle for vdd regulator device node.

IOMMU Data:
- iommu:			Phandle for the KGSL IOMMU device node

GPU Power levels:
- qcom,gpu-pwrlevel-bins:	Container for sets of GPU power levels (see
				adreno-pwrlevels.txt)

DCVS Core info
- qcom,dcvs-core-info		Container for the DCVS core info (see
				dcvs-core-info.txt)

Optional Properties:
- qcom,initial-powerlevel: This value indicates which qcom,gpu-pwrlevel should be used at start time
			   and when coming back out of resume
- qcom,restrict-powerlevel: This value to limit max GPU power level jump during the clock switch and
			   while coming back out of slumber. Max GPU power level jump still allowed
			   from the restricted-pwerlevel.
- qcom,bus-control:	   Boolean. Enables an independent bus vote from the gpu frequency
- qcom,bus-width:	   Bus width in number of bytes. This enables dynamic AB bus voting based on
			   bus width and actual bus transactions.
- qcom,gpubw-dev:	   a phandle to a device representing bus bandwidth requirements
			   (see devdw.txt)
- qcom,idle-timeout:	   This property represents the time in milliseconds for idle timeout.
- qcom,deep-nap-timeout:   This property represents the time in milliseconds for entering deeper
			   power state.
- qcom,chipid:		   If it exists this property is used to replace
			   the chip identification read from the GPU hardware.
			   This is used to override faulty hardware readings.
- qcom,strtstp-sleepwake:  Boolean. Enables use of GPU SLUMBER instead of SLEEP for power savings
- qcom,gx-retention:  	   Boolean. Enables use of GX rail RETENTION voltage
- qcom,disable-wake-on-touch:   Boolean. Disables the GPU power up on a touch input event.
- qcom,disable-busy-time-burst:
				Boolean. Disables the busy time burst to avoid switching
				of power level for large frames based on the busy time limit.

- qcom,pm-qos-active-latency:
				Right after GPU wakes up from sleep, driver votes for
				acceptable maximum latency to the pm-qos driver. This
				voting demands that the system can not go into any
				power save state *if* the latency to bring system back
				into active state is more than this value.
				Value is in microseconds.
- qcom,pm-qos-wakeup-latency:
				Similar to the above. Driver votes against deep low
				power modes right before GPU wakes up from sleep.
- qcom,l2pc-cpu-mask-latency:
				The CPU mask latency in microseconds to avoid L2PC
				on masked CPUs.
- qcom,force-32bit:
				Force the GPU to use 32 bit data sizes even if
				it is capable of doing 64 bit.

- qcom,gpu-speed-bin:      GPU speed bin information in the format
			   <offset mask shift>
				offset - offset of the efuse register from the base.
				mask   - mask for the relevant bits in the efuse register.
				shift  - number of bits to right shift to get the speed bin
				value.
- qcom,gpu-disable-fuse:	GPU disable fuse
				<offset mask shift>
				offset - offset of the efuse register from the base.
				mask   - mask for the relevant bits in the efuse register.
				shift  - number of bits to right shift to get the disable_gpu
				fuse bit value.
- qcom,highest-bank-bit:
				Specify the bit of the highest DDR bank. This
				is programmed into protected registers and also
				passed to the user as a property.

- qcom,l2pc-cpu-mask:
				Disables L2PC on masked CPUs when any of Graphics
				rendering thread is running on masked CPUs.
				Bit 0 is for CPU-0, bit 1 is for CPU-1...

- qcom,l2pc-update-queue:
				Disables L2PC on masked CPUs at queue time when it's true.

- qcom,snapshot-size:
				Specify the size of snapshot in bytes. This will override
				snapshot size defined in the driver code.

- qcom,enable-ca-jump:
                                Boolean. Enables use of context aware DCVS
- qcom,ca-busy-penalty:
                                This property represents the time in microseconds required to
                                initiate context aware power level jump.
- qcom,ca-target-pwrlevel:
                                This value indicates which qcom,gpu-pwrlevel to jump on in case
                                of context aware power level jump.

- qcom,gpu-qdss-stm:
				<baseAddr size>
				baseAddr - base address of the gpu channels in the qdss stm memory region
				size     - size of the gpu stm region

- qcom,tsens-name:
				Specify the name of GPU temperature sensor. This name will be used
				to get the temperature from the thermal driver API.

GPU Quirks:
- qcom,gpu-quirk-two-pass-use-wfi:
				Signal the GPU to set Set TWOPASSUSEWFI bit in
				A5XX_PC_DBG_ECO_CNTL (5XX only)
- qcom,gpu-quirk-critical-packets:
				Submit a set of critical PM4 packets when the GPU wakes up
- qcom,gpu-quirk-fault-detect-mask:
				Mask out RB1-3 activity signals from HW hang
				detection logic
- qcom,gpu-quirk-dp2clockgating-disable:
				Disable RB sampler data path clock gating optimization
- qcom,gpu-quirk-lmloadkill-disable:
				Use register setting to disable local memory(LM) feature
				to avoid corner case error

KGSL Memory Pools:
- qcom,gpu-mempools:		Container for sets of GPU mempools.Multiple sets
				(pools) can be defined within qcom,gpu-mempools.
				Each mempool defines a pool order, reserved pages,
				allocation allowed.
Properties:
- compatible:			Must be qcom,gpu-mempools.
- qcom,mempool-max-pages:	Max pages for all mempools, If not defined there is no limit.
- qcom,gpu-mempool:		Defines a set of mempools.

Properties:
- reg:				Index of the pool (0 = lowest pool order).
- qcom,mempool-page-size:	Size of page.
- qcom,mempool-reserved:	Number of pages reserved at init time for a pool.
- qcom,mempool-allocate:	Allocate memory from the system memory when the
				reserved pool exhausted.

The following properties are optional as collecting data via coresight might
not be supported for every chipset. The documentation for coresight
properties can be found in:
Documentation/devicetree/bindings/coresight/coresight.txt

- coresight-id           Unique integer identifier for the bus.
- coresight-name         Unique descriptive name of the bus.
- coresight-nr-inports   Number of input ports on the bus.
- coresight-outports     List of output port numbers on the bus.
- coresight-child-list   List of phandles pointing to the children of this
                         component.
- coresight-child-ports  List of input port numbers of the children.


Example of A330 GPU in MSM8916:

&soc {
	msm_gpu: qcom,kgsl-3d0@01c00000 {
		label = "kgsl-3d0";
		compatible = "qcom,kgsl-3d0", "qcom,kgsl-3d";
		reg = <0x01c00000 0x10000
		       0x01c20000 0x20000>;
		reg-names = "kgsl_3d0_reg_memory" , "kgsl_3d0_shader_memory";
		interrupts = <0 33 0>;
		interrupt-names = "kgsl_3d0_irq";
		qcom,id = <0>;

		qcom,chipid = <0x03000600>;

		qcom,initial-pwrlevel = <1>;

		/* Idle Timeout = HZ/12 */
		qcom,idle-timeout = <8>;
		qcom,strtstp-sleepwake;

		clocks = <&clock_gcc clk_gcc_oxili_gfx3d_clk>,
			<&clock_gcc clk_gcc_oxili_ahb_clk>,
			<&clock_gcc clk_gcc_oxili_gmem_clk>,
			<&clock_gcc clk_gcc_bimc_gfx_clk>,
			<&clock_gcc clk_gcc_bimc_gpu_clk>;
		clock-names = "core_clk", "iface_clk", "mem_clk",
				"mem_iface_clk", "alt_mem_iface_clk";

		/* Bus Scale Settings */
		qcom,msm-bus,name = "grp3d";
		qcom,msm-bus,num-cases = <4>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
			<26 512 0 0>,
			<26 512 0 1600000>,
			<26 512 0 3200000>,
			<26 512 0 4264000>;

		/* GDSC oxili regulators */
		vdd-supply = <&gdsc_oxili_gx>;

		/* IOMMU Data */
		iommu = <&gfx_iommu>;

		/* Trace bus */
		coresight-id = <67>;
		coresight-name = "coresight-gfx";
		coresight-nr-inports = <0>;
		coresight-outports = <0>;
		coresight-child-list = <&funnel_in0>;
		coresight-child-ports = <5>;

		/* Enable context aware freq. scaling */
		qcom,enable-ca-jump;

		/* Context aware jump busy penalty in us */
		qcom,ca-busy-penalty = <12000>;

		/* Context aware jump target power level */
		qcom,ca-target-pwrlevel = <1>;

		/* GPU Mempools */
		qcom,gpu-mempools {
			#address-cells= <1>;
			#size-cells = <0>;
			compatible = "qcom,gpu-mempools";

			/* 4K Page Pool configuration */
			qcom,gpu-mempool@0 {
				reg = <0>;
				qcom,mempool-page-size = <4096>;
				qcom,mempool-reserved = <2048>;
				qcom,mempool-allocate;
			};
			/* 8K Page Pool configuration */
			qcom,gpu-mempool@1 {
				reg = <1>;
				qcom,mempool-page-size  = <8192>;
				qcom,mempool-reserved = <1024>;
				qcom,mempool-allocate;
			};
			/* 64K Page Pool configuration */
			qcom,gpu-mempool@2 {
				reg = <2>;
				qcom,mempool-page-size  = <65536>;
				qcom,mempool-reserved = <256>;
			};
			/* 1M Page Pool configuration */
			qcom,gpu-mempool@3 {
				reg = <3>;
				qcom,mempool-page-size  = <1048576>;
				qcom,mempool-reserved = <32>;
			};
		};

		/* Power levels */
		qcom,gpu-pwrlevels-bins {
			#address-cells = <1>;
			#size-cells = <0>;

			qcom,gpu-pwrlevels-0 {
				#address-cells = <1>;
				#size-cells = <0>;

				qcom,speed-bin = <0>;

				qcom,gpu-pwrlevel@0 {
					reg = <0>;
					qcom,gpu-freq = <400000000>;
					qcom,bus-freq = <3>;
					qcom,io-fraction = <33>;
				};

				qcom,gpu-pwrlevel@1 {
					reg = <1>;
					qcom,gpu-freq = <310000000>;
					qcom,bus-freq = <2>;
					qcom,io-fraction = <66>;
				};

				qcom,gpu-pwrlevel@2 {
					reg = <2>;
					qcom,gpu-freq = <200000000>;
					qcom,bus-freq = <1>;
					qcom,io-fraction = <100>;
				};

				qcom,gpu-pwrlevel@3 {
					reg = <3>;
					qcom,gpu-freq = <27000000>;
					qcom,bus-freq = <0>;
					qcom,io-fraction = <0>;
				};
			};
		};

	};
};
