config FB_MSM_MDSS_WRITEBACK
	bool "MDSS Writeback Panel"
	---help---
	The MDSS Writeback Panel provides support for routing the output of
	MDSS frame buffer driver and MDP processing to memory.

config FB_MSM_MDSS_HDMI_PANEL
	depends on FB_MSM_MDSS
	bool "MDSS HDMI Tx Panel"
	default n
	---help---
	The MDSS HDMI Panel provides support for transmitting TMDS signals of
	MDSS frame buffer data to connected hdmi compliant TVs, monitors etc.

config FB_MSM_MDSS_HDMI_MHL_SII8334
	depends on FB_MSM_MDSS_HDMI_PANEL
	bool 'MHL SII8334 support '
	default n
	---help---
	  Support the HDMI to MHL conversion.
	  MHL (Mobile High-Definition Link) technology
	  uses USB connector to output HDMI content

config FB_MSM_MDSS_SHARP_HD_PANEL
        bool "MDSS SHARP HD Panel"
        default n
        ---help---
        The MDSS SHARP LCD Panel support

config BACKLIGHT_KTD2801
	bool "Backlight IC KTD2801"
	default n

config MDNIE_VIDEO_ENHANCED
bool "MDNIE VIDEO ENHANCED"
	default n

config FB_MSM_MDSS_DSI_CTRL_STATUS
	tristate "DSI controller status check feature"
	---help---
	  Check DSI controller status periodically (default period is 5
	  seconds) by sending Bus-Turn-Around (BTA) command. If DSI controller
	  fails to acknowledge the BTA command, it sends PANEL_ALIVE=0 status
	  to HAL layer to reset the controller.

config FB_MSM_MDSS_MDP3
	depends on FB_MSM_MDSS
	bool "MDP3 display controller"
	---help---
	The MDP3 provides support for an older version display controller
	included in latest display sub-system, known as MDSS.

config FB_MSM_MDSS_DBG_SEQ_TICK
	bool "SEQ tick dbg support"
	default n

config FB_MSM_MDSS_DSI_DBG
	bool "DSI dbg support"
	default n

config SAMSUNG_CMC624
	bool "Support for integrated LCD controller in msm89XX"
	depends on FB && ARCH_MSM
	default n

config FB_EBOOK_PANEL_SCENARIO
	bool "Samsung EBOOK PANEL SCENARIO"
	depends on FB_MSM
	depends on SAMSUNG_CMC624
	default n

config FB_MSM_MIPI_DSI_NOVATEK_NT35596
	bool
	select FB_MSM_MIPI_DSI
	default n

config FB_MSM_MIPI_NOVATEK_VIDEO_HD_PT
	bool
	select FB_MSM_MIPI_DSI_NOVATEK_NT35596
	default n

config FB_MSM_MIPI_NOVATEK_VIDEO_HD_PT_PANEL
	bool "MIPI NOVATEK VIDEO HD PT Panel"
	select FB_MSM_MIPI_NOVATEK_VIDEO_HD_PT
	default n

config MDNIE_LITE_TUNING
	bool "MDNIe lite panel tuning"
	default n

config MDNIE_ENHENCED_LOCAL_CE
	bool "MDNIe lite panel tuning for enhenced local ce"
	default n

config MDNIE_TFT_MSM8X26
	bool "MDNIe feature for 8x26 tft panels"
	default n

config FB_MSM_MIPI_SAMSUNG_OCTA_VIDEO_FULL_HD_PT_PANEL
	bool "Support SAMSUNG OCTA Video Full-HD Panel"
	default n

config FB_MSM_MIPI_MAGNA_OCTA_VIDEO_720P_PT_PANEL
	bool "Support MAGNA OCTA Video 720P Panel"
	default n

config FB_MSM_MIPI_MAGNA_OCTA_VIDEO_WXGA_PT_DUAL_PANEL
	bool "Support MAGNA OCTA Video WXGA dual Panel"
	default n

config FB_MSM_MDSS_MAGNA_OCTA_VIDEO_720P_PT_PANEL
	bool "Support Magna OCTA Video 720P (EA8061) Panel"
	default n

config FB_MSM_MDSS_MAGNA_LDI_EA8061
	bool "Support Magna OCTA Video 720P (EA8061) Panel"
	default n

config FB_MSM_MDSS_SAMSUNG_OCTA_VIDEO_720P_PT_PANEL
	bool "Support SAMSUNG OCTA Video 720P (S6E8AA4) Panel"
	default n

config FB_MSM_MDSS_MSM8X26
	bool "Support Panel for MSM8x26 chipset"
	default n

config FB_MSM_MIPI_SAMSUNG_OCTA_CMD_FULL_HD_PT_PANEL
	bool "Support SAMSUNG OCTA Command Full-HD Panel"
	default n

config FB_MSM_MIPI_SAMSUNG_OCTA_CMD_WQHD_PT_PANEL
	bool "Support SAMSUNG OCTA Command WQHD Panel"
	default n

config FB_MSM_MIPI_MAGNA_OCTA_CMD_HD_PT_PANEL
	bool "Support MAGNA OCTA Command HD Panel"
	default n

config FB_MSM_MIPI_SAMSUNG_YOUM_CMD_FULL_HD_PT_PANEL
	bool "Support SAMSUNG YOUM Command Full-HD Panel"
	default n

config FB_MSM_MIPI_S6E8AA0A_720P_PT_PANEL
	bool "Support SAMSUNG OCTA Video 720P Panel"
	default n

config FB_MSM_MIPI_S6E88A0_QHD_VIDEO_PT_PANEL
	bool "Support SAMSUNG OCTA Video qHD Panel"
	default n

config FB_MSM_MDSS_S6E8AA0A_HD_PANEL
	bool "MDSS S6E8AA0A HD Panel"
	default n
	---help---
	The MDSS S6E8AA0A LCD Panel support

config MIPI_LCD_S6E3FA0_FORCE_VIDEO_MODE
	bool "Enforce DSI VIDEO Mode on S6E3FA0 panel"
	default n

config FB_MSM_MIPI_SAMSUNG_OCTA_VIDEO_WVGA_S6E88A0_PT_PANEL
	bool "Support SAMSUNG OCTA Video WVGA Panel"
	default n

config FB_MSM_MIPI_CMD_WVGA_ILI9806B_PT_PANEL
	bool "MIPI CMD WVGA ILI9806B PANEL"
	default n

config FB_MSM_MIPI_VIDEO_WVGA_NT35502_PT_PANEL
	bool "MIPI VIDEO WVGA NT35502 PANEL"
	select WHITE_PANEL
	select MDSS_DSI_EVENT_HANDLER_PANEL
	select MDNIE_LITE_TUNING
	select CLK_TUNING
	default n

config FB_MSM_MDSS_HX8369B_TFT_VIDEO_WVGA_PT_PANEL
	bool "MIPI VIDEO WVGA HX8369B PANEL"
	default n

config FB_MSM_MDSS_HX8394C_TFT_VIDEO_720P_PANEL
	bool "MIPI VIDEO 720P HX8394C PANEL"
	default n

config BACKLIGHT_IC_KTD253
	bool "BACKLIGHT IC KTD253"
	default n

config BACKLIGHT_IC_KTD2801
	bool "BACKLIGHT IC KTD2801"
	default n

config REGULATOR_LP8720
	bool "Support Regulator LP8720"
	default n

config DUAL_LCD
	bool "Support DUAL LCD"
	select FB_MSM_MIPI_MAGNA_OCTA_VIDEO_WXGA_PT_DUAL_PANEL
	default n

config LCD_HMT
	bool "Support LCD HMT"
	default n

config FB_MSM_MIPI_JDI_TFT_VIDEO_FULL_HD_PT_PANEL
	bool "Support JDI TFT VIDEO FULL HD Panel"
	select FB_MSM_MIPI_DSI
	default n

config SUPPORT_DISPLAY_OCTA_TFT
	bool "support OCTA and TFT panel"
	default n

config FB_MSM_CAMERA_CSC
	default n
	bool "Support SAMSUNG CAMERA CSC"
	---help---
		Support for camera CSC tuning

config FB_MSM_EDP_SAMSUNG
	bool "Support SAMSUNG EDP TCON"
	default n

config EDP_ESD_FUNCTION
	bool "Support EDP esd function"
	default n

config EDP_TCON_MDNIE
	bool "Support EDP mdnie function"
	default n

config CABC_TUNING
	bool "CABC panel tuning"
	default n

config CABC_TUNING_HX8394C
	bool "CABC panel(HX8394C) tuning"
	default n

config FB_MSM_MIPI_TFT_VIDEO_FULL_HD_PT_PANEL
	bool "Support TFT VIDEO FULL HD Panel"
	select FB_MSM_MIPI_DSI
	default n

config ESD_ERR_FG_RECOVERY
	bool "ESD Feature"
	default n

config LCD_CRACK_RECOVERY
	bool "LCD crack recovery feature"
	default n
config FB_MSM_MDSS_SDC_WXGA_PANEL
	bool "MDSS SDC WXGA Panel"
	default n
	---help---
	The MDSS SDC LCD Panel support

config FB_MSM_MDSS_CPT_QHD_PANEL
	bool "support CPT qHD panel"
	default n

config LCD_CONNECTION_CHECK
	bool "check if LCD connected or not and detect panel vendor"
	default n

config SAMSUNG_DEBUG_DISPLAY
	bool "Add Samsung Debugging code"
	default n

config FB_MSM_MDSS_TC_DSI2LVDS_WXGA_PANEL
	bool "TOSHIBA DSI2LVDS CONVERTER"
	default n
	---help---
	The TOSHIBA DSI2LVDS CONVERTER support

config TC358764_I2C_CONTROL
	bool "TOSHIBA I2C CONTROLLER"
	default n
	---help---
	The TOSHIBA I2C CONTROLLER support
config LCD_FORCE_VIDEO_MODE
	bool "forcing video mode on cmd panle"
	default n

config FB_MSM_MIPI_SAMSUNG_TFT_VIDEO_WQXGA_PT_PANEL
	bool "Support SAMSUNG TFT Video WQXGA Panel"
	default n

config FB_MSM_MIPI_SAMSUNG_OCTA_CMD_WQXGA_S6TNMR7_PT_PANEL
	bool "Support SAMSUNG AMOLED Command WQXGA (S6TNMR7) Panel"
	default n

config FB_MSM_MIPI_SAMSUNG_OCTA_CMD_WQXGA_S6E3HA1_PT_PANEL
	bool "Support SAMSUNG AMOLED Command WQXGA (S6E3HA1) Panel"
	default n

config FB_MSM_MDSS_MAGNA_OCTA_VIDEO_720P_PANEL
	bool "Support Magna OCTA Video 720P (EA8061) Panel"
	default n

config FB_MSM_MIPI_SAMSUNG_OCTA_VIDEO_HD_PANEL
	bool "Support Magna OCTA Video 720P (EA8061) Panel"
	default n

config EDP_EXTERNAL_POWER
	bool "Support EDP external power"
	default n

config FB_MSM8x26_MDSS_CHECK_LCD_CONNECTION
	bool "Support LCD connection check"
	default n

config GET_LCD_ATTACHED
	bool "check if LCD connected or not and detect panel vendor"
	default n

config GET_LCD_PCD_DETECTED
	bool "check if PCD detected or not"
	default n

config WHITE_PANEL
	bool "Support normally White Panel"
	default n

config DSI_HOST_DEBUG
	bool "Support MSP3 DSI Command debugging"
	default n

config MDSS_DSI_EVENT_HANDLER_PANEL
	bool "Support MDSS_DSI_EVENT_HANDLER_PANEL"
	default n

config CLK_TUNING
	bool "Support CLK tuning"
	default n

config MDP_NEGATIVE_SUPPORT
	bool "Support MDP negative color"
	default n

config MDSS_UD_FLIP
	bool "Support MDSS UD flip"
	default n

